how to install ink cartridge in canon ip2700 printer

However, when the ink absorber becomes full, no further printing can be performed unless the applicable ink absorber is replaced. Pressing the Resume/Cancel button will exit the error, and enable printing without replacing the ink absorber. Replace the ink absorber, and reset its counter. The ink absorber can only be replaced by a qualified technician. Contact the support center or the service center. The printer will soon require servicing to replace the ink absorber. Press the printer's RESUME button to continue printing. Warning: The ink absorber becomes almost full.

If the error is not cleared, the ink cartridge may be defective. Replace the wrong ink cartridge(s) with the correct one(s). Use only one ink cartridge per type at a time. More than one ink cartridge of the following type is installed. Multiple ink cartridges of the same color installed. Install the ink cartridge(s) in the correct position. If printing is in progress, cancel printing and install the ink cartridge. Install the following ink cartridge in the appropriate position. Replace the ink cartridge.Īn ink cartridge is not installed in the correct position.

If the error is not cleared, the ink cartridge may be defective.Ī non-supported ink cartridge is installed. If you want to cancel printing, click Cancel Printing. Printing cannot be executed because the ink cartridge may not be installed properly or may not be compatible with this printer. The following ink cartridge cannot be recognized. Open the printer's cover, firmly push down the ink cartridge locking cover, and then make sure the ink cartridge is installed properly. Remove the jammed paper, and press the Resume/Cancel button.Īn ink cartridge is not installed properly.

Set the paper in the rear tray, and press the Resume/Cancel button.

How to install ink cartridge in canon ip2700 printer